how to convert stereo input into mono

how to convert stereo input into mono. In the previous post I explained about the difference between mono and stereo audio. As you knew that audio input consists of two types of mono and stereo input, and both audio types consist of L channel and R channel

[adinserter block=”1″]

In this post I will show you how to convert stereo input into mono. Keep in mind that stereo input can be converted into mono but mono input can’t be converted to stereo

The following tips are also useful if you has experienced vocal sound is missing on the amplifier

how to convert stereo input into mono?

Stereo audio consists of 2 channels, namely L channel and R channel while mono input consists only one channel

In stereo audio will be heard the effects of music such as bass on the left, drum sound on the right, voice vocals in the middle and other effects depending on the maker of the audio

suggested reading

If you have a stereo amplifier then you can connect L and R inputs directly. The characteristics of the stereo amplifier are the input channels L and R and there is a balance setting

[adinserter block=”2″]

If the balance settings are rotated to the right then the live one is the right loud speaker, if the balance is rotated to the left of the live loud speaker is the left while if the balance is placed in the middle then the second loud speaker will light up

 

read also the working principle of loud speakers

 

The above will happen on the stereo type amplifier. But if the amplifier pal is a type of mono then the above can not be done

how to convert stereo input into mono

Then what if the amplifier pal is a type of mono while the audio input pal is a type of stereo?

Continue you read this article

Missing vocal sounds on the amplifier

Have you ever experienced a problem on your amplifier for example is when you connect your phone on the amplifier and voice vocals are lost on the amplifier but if you rotate it through the headset vocal sound appears and there is no problem?

This happens when you use mono amplifiers and you connect one of the inputs L or R then the resulting audio is defective eg the music will appear bass only, or the absence of vocals and many more

read also

To be able to connect mono amplifier with stereo input you must first change the input stereo into mono after that you can connect it to the amplifier

[adinserter block=”3″]

How to change the stereo input into mono you can use 2 resistors as a holder so that inputs L and R do not mix directly. Basically the mono channel is the sum of the stereo channels (L + R)

Missing vocal sounds on the amplifier

Here’s the resistor circuit scheme to convert the stereo input into mono

Missing vocal sounds on the amplifier, how to convert stereo input into mono, stereo into mono

By using only 2 resistors now you can connect your mono amplifier with stereo input without any vocal sound constraints lost in your amplifier, as well as other effects

 

read also simple tone control circuit 2 transistors

 

 

Leave a Reply

Your email address will not be published. Required fields are marked *